project = TPTCSOOF_070209 (Todd, John in control room, operator = David Rose)
starting (az,el) = 48.7, 77.8
scan UT type gain settings
1 16:59:12 daisy7arcmin az=0.20, elev=0.11
2 17:06:59 " 0.40
4 17:14:45 " 0.80
5 17:19:10 " 0.60
6 17:23:37 " 0.00
8 17:28:29 circleAtHalfPower 0.60
9 17:31:06 " 0.80
10 17:34:53 " 1.00, 0.25
11 17:37:57 " 0.50, 0.08
12-17 17:41:57 FastSwitchSimAzEl 0.40, 0.11
18-21 17:50:44 " 0.20, 0.08
22-25 17:57:26 " 0.00, 0.00
slewing went nuts, possibly due to pseudo-source going through the zenith?
move back to az=104, el=77.8
26 18:07:55 daisy7arcmin 0.30, 0.09
27 18:12:18 quickdaisy " "
28 18:15:44 ccbnods " "
29 " " 0.00
30-32 18:19:22 " 0.20, 0.11
33-34 18:23:00 " 0.00, 0.11
35 18:27:03 daisy7arcmin 0.25, 0.11
36 18:32:03 ccbnods 0.50, 0.11
-- ToddHunter - 09 Feb 2007
Note that the azimuth rms tracking errors listed in the plots attached below are w.r.t. the azimuth axis. On-sky performance will be better by the factor of cosine(elevation).
circleazimcompare.pdf