| Description | Priority | PO Request | Tested GUI | Tested Tables |
|---|
| Limit off-line users running GO in simulate mode from affecting telescope setup via IARDS. | 1 | xxx |  | |
| GO Should not change velocity, velocity frame, or velocity definition when changing observing modes. Too easy to miss resetting these parameters when observing and badly compromised data results. | 1 | 802,1017 | | |
| Rates should not be setable when using NOD. Instead, the NOD procedure should eliminate the rate widgets and simply use zero rates at all times. Too much data has been corrupted by late-night mistakes. | 2 | 945 | | |
| GO should retain frequency-switching values between changes in mode -- this will eliminate the need for those frequency switching to use CLEO's LO1 screen. | 3 | xxx | | |
| PEAK should pick "ENCODER" offsets, which is necessary for GFM to work and is something IARDS can handle as well. | 4 | xxx | | |
| Integrate fix for procedure iteration count in go_tables.g | 4 | 1019 | | |
| GO currently doesn't know about the polarization and beam switches in the X- and Ka-band receivers. Thus, observers using GO cannot utilize these switches. | 5 | xxx | | |
| Remove "GO" and have "GO_LITE" the one and true GO. | 6 | xxx | | |
| NOD should not allow the user the ability to set the starting beam. Instead, the NOD procedure should eliminate the beam selection widget and assume the selected feed as the selected beam. | 7 | xxx | | |
| PEAK should obtain it's values from a lookup table based on SKY frequency (warning: this should not use rest frequency). | 8 | xxx | | |