NRAO Home  >  Green Bank  |  Wiki Topic:    GB > Software > PlanOfRecordC52007 > ModificationRequest1C507

Changes | Index | Contents | Search | Statistics | Go

Ka Manager Changes

Modification Request 1C507

• 1. Introduction
• 2. Background
• 3. Requirements
  • General
  • Specific
    • Parameters to disable:
    • Samplers to disable:
    • Problems Noted
• 4. Design
  • Cleo
• 5. Add Any More Sections That Are Appropriate
• 6. Deployment Checklist
• 7. Test Plan
  • Cleo
  • 7.1 Internal Testing
  • 7.2 Sponsor Testing
  • 7.3 Integration/Regression Tests
• Signatures
• CCC Discussion Area

1. Introduction

2. Background

3. Requirements

General

Specific

Parameters to disable:

Samplers to disable:

Problems Noted

4. Design

What is your plan? How are you going to fulfill the requirements?

Cleo

Since the manager may be reverted to its old configuration, CLEO will use the existence or absence of parameter fields to determine whether it is the old of new receiver design that is in use. CLEO will then configure its look according to the state of the manager. Work involved includes:

• Create a second GIF showing the stripped down receiver design
• Adding a check for any of the removed parameter fields and setting an internal flag
• Use that flag to determine whether to not to place/grid widgets that deal with the missing fields
• Use that flag to determine which of the two GIFs (old or new) is to be used.

Approximately 1.5 days of work.

5. Add Any More Sections That Are Appropriate

6. Deployment Checklist

What has to get done to integrate this completely into the system. This checklist must be completed before Cycle Integration Testing begins.

• Communication with Computing group needed?
• What documentation needs to be updated?
• Training Needed? Is this being released to staff astronomers or everyone right now?
• Notification Needed?

7. Test Plan

Cleo

Testing will consist of setting by hand the above-mentioned flag to determine whether the application configures itself appropriately.

Critical!! ChangeControlCommittee will be reviewing these.

Don't forget to include/acquire any additional GBT test time needed outside integration/regression testing! Get your requests in early!

Important! If possible, you should conduct as many of your tests as possible in offline modes and/or with a simulator. We should constantly endeavor to minimize our use of telescope time for testing!

7.1 Internal Testing

This section covers things like unit testing, simulator testing, and any other tests required to make sure this MR is ready for sponsor/integration/regression testing.

7.2 Sponsor Testing

7.3 Integration/Regression Tests

What do the integration/regression testers need to do in order to test this MR.

Signatures

APPROVED: I acknowledge that my request is fully contained in this MR, and if the SDD delivers exactly what I specified, I will be happy.

ACCEPTED: I acknowledge that I have validated the completed code according to the acceptance tests, and I am happy with the results.

Symbols:

• Use %X% if MR is not complete (will display )
• Use %Y% if MR iscomplete (will display )

CCC Discussion Area

-- GalenWatts - 12 Jul 2007